...instrukcja serwisowa w pełni czytelna i kompletna. Dziękuję!
Tekstowy podgląd strony 18 (kliknij aby zobaczyć)
CBM-262 SERVICE MANUAL
17. Removing the Bracket R (Receipt Side)
s Removing the Auto Cutter
1) Take out the two screws holding the auto cutter. 2) Remove the auto cutter upward. 3) Disconnect the connector connecting the auto cutter and the relay board.
s Removing the Auto Cutter Paper Guide
1) Take out the four screws holding the auto cutter paper guide. 2) Remove the auto cutter paper guide.
s Removing the Relay Board
1) Take out the screw holding the relay board. 2) Remove the relay board.
s Removing the Cutter Lock Lever
1) Take out the screw holding the cutter lock lever. 2) Remove the cutter lock lever.