PHILIPS 14PV330/07
Instrukcja Obsługi

Manual TV channel search
In certain cases the �Automatic TV channel search� may not be able to find all of the TV channels (e.g. coded TV channels). In that case, use this manual method to set the channels.
a Press the MENU button on the remote control. The main

E To confirm the information, press the

OK

button.

h If you want to change the automatic tv channel setting,

select the line �Fine tuning�. With the DSr or SqC button you can vary the automatic tv channel setting. Important: This re-tuning is only necessary and useful in special cases, e.g.: when there are stripes on the picture with cable-TV systems.
i Press the OK button to store the TV channel.

menu will appear.
b Select the line �Installation� with the BP r or
AP q

button and confirm with the

SqC

button.

D If you want to search for further TV channels, start again at step e.
j To end, press the MENU button.

c Select the line �Manual store� with the BP r or
AP q

button and confirm with the

SqC

button.

D If you have programmed a recording (TIMER), a wake-up timer or a sleep-timer, you can�t select the function �Manual store�.
MANUAL STORE

Channel/Frequency

FREQU.

Satellite receiver
You can receive channels from the satellite receiver via the scart socket EXT. 1 . To do this, select the channel number �E1� with the P p button. You will have to select the channels to be received by the satellite receiver on the receiver itself.

Search 123 Fine tuning (,,,,=,,,,$ Name edit xxx Programme number 01 Decoder OFF

ã Exit: « press MENU

d In the line �Channel/Frequency�, select the

display for: �FREQU.�: frequency �C CH�: channel �S CH�: special channel
e If you know the frequency or channel of the desired TV

channel, you can enter the data in line �Search� with the digit buttons 0-9 . D If you don�t know the frequency or channel of the TV channel of your choice, press the SqC button to start the channel search.
f In the line �Programme number� select the

programme number you want e.g.: �01�, using the DSr or SqC button.
g If you want to change the TV channel name, press the
SqC

button in line �Name

edit�.

E Select the character you want to change with the DSr or the SqC button. Change the character with the BP r or the AP q button. Select the next character in the same way.

6