PHILIPS 14PV405
Instrukcja Obsługi

7.

MANUAL RECORDING
Recording with automatic switch-off (OTR one-touch-recording)
a Put a cassette in the machine. b Use the ABP q/r button to select the programme

Use �Manual Recording� to make a spontaneous recording (for example, a programme currently being shown). E If you want to start and stop a recording manually, read the section: �Recording without automatic switch-off�. E If you want to start a recording manually but have it stopped automatically, read the section: �Recording with automatic switch-off�.

number you want to record.
c Press the RECORD/OTR n button on the remote control.

Recording without automatic switch-off
a Insert a cassette. b Use the ABP q/r button to select the programme

When you are recording, the red recording light at the front panel of the TV-VIDEO Combi will be lit.
d Press the RECORD/OTR n button again and again until the

number you want to record, for example, �P01�. D Programme number �E1� is provided for recording from external sources (via the EXT. 1 scart socket). D Programme number �AV� is provided for recording from external sources (via the Audio/Video socket AUDIO at the front of the TV-VIDEO Combi).
c To start recording, press the RECORD/OTR n button on the

display on the TV-VIDEO Combi shows the desired end time or length of the recording. D To cancel this information, press the
e Confirm with the OK button. f To end, press the MENU button.
CLEAR

button.

Protecting your recordings
So that you don�t accidentally delete an important recording, remove the special tab on the narrow side of the cassette with a screwdriver or slide the special tab to the left. Later, if you no longer want to protect your recording, you can seal the gap again with sticky tape or slide the special tab to the right.

remote control or 5 on the TV-VIDEO Combi. When you are recording, the red recording light at the front panel of the TV-VIDEO Combi will be lit.
d Stop recording with the STOP h button.

D If you want to switch off the screen while recording, press the STANDBY m button once . D To switch the screen back on again, press the ABP q/r button. D During a recording you can only watch the current programme.

Auto-assembling
You can use the auto-assembling function to join individual recordings without any major picture disturbance between them.
a While the cassette is playing, search for the correct

position on the tape.
b Stop the cassette by pressing the STOP h button.

�Pause� will appear on the TV screen.
c Now start recording as usual by pressing the
RECORD/OTR n

button on the remote control.

17