Documentation made available quickly and It is good quality. Thanks.
Tekstowy podgląd strony 6 (kliknij aby zobaczyć)
Figure1: WISP Main Menu
Figure2: I2C Configuration 5- Click �Erase Flash� button and then click �Send� button. If ereasing is done without any problem, �three green OK� will be displayed on the main menu window. This indicates that the memory inside the IC is erased succesfully. 6- Click �Write Flash� button and then click �Browse� button. Select the �gtv.hex� UOC code file by browsing the explorer to the folder where this �gtv.hex� file is stored. Wait for a few seconds untill the program reads the code. You will see the blue bar indicating the �reading operation� on the bottom of the Wisp main menu window. 7- Click �Send� button. You will see the blue bar indicating the �Loading Code to UOC IC� on the bottom of the window. When the loading operation is over without any error �three green OK� will be displayed on the window. This indicates the loading operation is performed succesfully.
Step3: Initializing the TV
8- Turn off and on the TV. Press RCs �Menu� (M) and �4��7��2��5� buttons respectively. 9- Press RCs �0� �0� �1� buttons respectively. (�Init TV 0� will be displayed on the screen) 10- Press RCs �Volume +� and set �Init TV 1� and wait the TV to automatically turn off.
