PHILIPS 20HF4003F/10
Instrukcja Obsługi

Installing your television set
& Positioning the television set
Place your TV on a solid stable surface.To avoid danger do not expose the TV to water, or a heat source (e.g. lamp, candle, radiator). Do not obstruct the ventilation grid at the rear.

é Connecting the aerials � Insert the aerial plug into the : socket at the
rear of the set. � Connect the power lead to the television and the mains plug into the wall socket (220-240 V/50 Hz). For connecting other appliances see page p.12.

� Switching on
To switch on the set, press the POWER key.A green indicator comes on and the screen lights up. Go straight to the Quick Installation chapter. If the TV remains in standby mode(red indicator), press the P -/+ key on the remote control. The indicator will flash when you use the remote control.

Quick installation
When you turn on the TV set for the first time, � The search starts automatically.All the available a menu is displayed on screen.This menu TV programmes will be stored. This operation prompts you to select the country and language takes a few minutes.The display shows the for the menus: progress of the search and the number of programs found.At the end of the search, the Plug�n�Play menu disappears.
Country � GB � � Language English �

If the menu is not displayed, press the MENU key to display the menu. & Use the <> keys on the remote control to select your country and confirm with �. If your country does not appear in the list, select choice �. . .� é Next select your language using the <> keys and confirm with �.

To exit or interrupt the search, press MENU. If no programme is found, consult the possible solutions p. 14. � If the transmitter or cable network sends the automatic sort signal, the programs will be numbered correctly. In this case, the installation is complete. ( If this is not the case, you need to use the Sort menu to number the programs correctly. Some transmitters or cable networks broadcast their own sort parameters (region, language, etc.). In this case, indicate your choice using the <> keys and validate with �.

5