PHILIPS 21PT4426/01
Instrukcja Obsługi

Installing your television set
æ � ê ® GB

Insert the aerial plug into the : socket at the rear of the set.

Insert the mains plug into a wall socket (220-240 V / 50 Hz).

Insert the two R6type batteries (supplied) making sure that they are the right way round.

To switch on the set, press the on/off key. If the television remains in standby mode, press P # on the remote control.

Quick installation
When you turn on the TV set for the first time, a menu is displayed on screen.This menu prompts you to select the country: If your country does not appear in the list, select choice �. . .� é The search starts automatically.All the available TV programmes will be stored. This operation takes a few minutes.The display shows the progress of the search and the number of programs found. At the end of the search, the menu disappears. To exit or interrupt the search, press H. If no programme is found, see Tips chapter at the end of the instruction for use. � The programmes found are arranged by number 99, 98, 97, �etc.You may now renumber these programmes as you wish. See Program sort below.

Country Autostore

...

�

If the menu is not displayed, press and hold down the �- and �+ keys on the TV set for 5 seconds to display the menu. & Use the �¬ keys on the remote control to select your country and validate with �.

Program sort
& Press key H.The Main menu is displayed on the screen. � Use the 09 or @P# keys to select the program you wish to renumber. � Then use the � key to select Program No and enter the new number with the �¬ keys. ( With the � key, select Store and press ¬. § Repeat steps � to ( for each program you wish to renumber. è To quit the menus, press d.

Manual Store �

System Search

Europe � 224 MHz

é With the î key, select Manual Store and press ¬.

3