PHILIPS 21PV288/05
Instrukcja Obsługi

3 Select �SLEEPTIMER� line. 4 With the
D

Manual channel search
button you can determine In certain cases the Automatic channel search may not be able to find all of the TV channels (e.g.: coded TV channels). You can then use this manual method to set the channels.
1 Switch on the set with the
STOP h button. Press C simultaneously.

or the

C

the minutes left until switch off in 15 minutes intervals. When you set the time to �0� with the CLEAR button the sleep function is switched off.
5 Press the
MENU

button.

the

menu buttons

D

and

Switch set on function
You can programme your set to switch on at a predetermined time.
1 Press the
MENU

2 Select and confirm the �MANUAL STORE� line.

MANUAL STORE CHANNEL/FREQ. SEARCH FINE TUNING PROGRAMME NR. DECODER STORE

vw C-21 1

button.

2 Select and confirm the �FEATURES� line. 3 Select and confirm the �ON TIMER� line. 4 Determine the time you wish the set to switch on. 5 Select the �WAKE UP� line and switch the �on-timer� on or 3 Select the �SEARCH� line. 4 Press the

button as often as necessary, until you have found the right TV channel.

C

off.
6 Press the 7 Press the
MENU

button. button.

Note: * If you want to allocate a decoder, switch the decoder function on or off with the D or C button in the �DECODER� line. * If you want to change the automatic channel setting, select the �FINE TUNING� line. With the D or C button you can vary the automatic TV channel setting. Important: This re-tuning is only necessary and useful in special cases, e.g.: when there are stripes on the picture with cable-TV systems.

STANDBY m

Child lock
1 Press the
MENU

button.

2 Select and confirm the �FEATURES� line. 3 Select the �CHILD LOCK� line. 4 Switch the child lock on or off. 5 Press the
MENU

5 In the �PROGRAMME NR.� line use the

button to select the required programme number, e.g.: �P 01� .

Pp

6 Select and confirm the �STORE� line. 7 If you want to search for further TV channels, start again

button.

Note: If a button is pressed with the childlock �on�, �CHILD LOCK� appears for a few seconds in the display. * Programmed recordings are made despite the child lock and cannot be interrupted.

at step 4. To finish, press the

MENU

button twice.

9