REMOTE CONTROL USE WITH ACCESSORY DEVICES - CODE ENTRY METHOD
N
ow that you have looked up the threedigit Remote Code Number for your brand of device, you are ready to follow the four simple steps below. Please read through steps 1-4 before beginning.
1 2 3 4 5
Place the TV/VCR/ACC Mode Switch in the proper position. Press the VCR � RECORD button on the remote control and release. Press the AUTO SOUND button on the remote within 30 seconds, then release.
1 3
VCR
Enter the THREE-DIGIT REMOTE CODE NUMBER (page 29-31) for your desired device. The remote is now ready to send commands to the unit. Point the remote at the Device. Press the POWER button on the remote to turn the unit ON.
Satellite Receiver or DBS, DVD
2 5
VOL
HELPFUL HINT
Remember, if this doesn�t work the first time, repeat the steps using a different remote code number. After a second try and the remote does not operate your device, see if there is another three-digit code number (pages 29-31) listed for your device and repeat the steps above using the new number. If after repeated attempts the code number method does not work you device, try the SEARCH METHOD on the next page.
Cable Converter
4
VOL
NOTE: Setting up the remote is for use with external accessory devices only and not for use with other television brands.
