Schematy są ale można wysilić się i zrobić kolorowy skan i o większej rozdzielczości. Wtedy schematy płytek będą czytelniejsze. Całość super jako wartość merytoryczna. Wszystkie dane potrzebne do podłączenia różnego rodzajów urządzeń takich gramofon, CD itd.
jedyne do czego mogę mieć zastrzeżenie to jakość zdjęć zawartych w przesłanej instrukcji serwisowej ponieważ są fatalnej jakości, praktycznie nieczytelne. tak poza tym jestem zadowolony to jest to czego szukałem.
Tekstowy podgląd strony 16 (kliknij aby zobaczyć)
28LD5200E (PW1L)
Item
AUTOMATIC SIGNAL LEVEL ADJ USTMENT �RGB (1)
Procedure (1) Select RGB2 and enter the service adjustment mode. (2) Select No.740 �RGB Amp. Gain ADJ.� and press OK button for more than 2 seconds to start the adjustment. It will complete the adjustment after the OSD of �AUTO MODE� disappeared.
Preparation (1) Input the adjustment signal of VGA (60Hz) format into RGB2 [D-sub] input terminal. the adjustment signal
The signal level of black area should be pedestal level. This signal must not be inserted characters etc.
Black White 0.7V
[Note] Never adjust without use of the specified signal. If that were done by mistake, the picture would become abnormal in black level, contrast and color. In this case, it will be recovered by re-adjustment in the specified way.
Item
AUTOMATIC SIGNAL LEVEL ADJ USTMENT �RGB (2)
Procedure (1) Select AV1 and enter the service adjustment mode. (2) Select No.740 �RGB Amp. Gain ADJ.� and press OK button for more than 2 seconds to start the adjustment. It will complete the adjustment after the OSD of �AUTO MODE� disappeared. (3) Select No.741 �RGB Amp. Gain ADJ.� and press OK button for more than 2 seconds to start the adjustment. It will complete the adjustment after the OSD of �AUTO MODE� disappeared.
Preparation (1) Input the adjustment signal of 576p or 480p format into AV1 input terminal. the adjustment signal
The signal level of black area should be pedestal level. This signal must not be inserted characters etc.
Black White 0.7V
[Note] Never adjust without use of the specified signal. If that were done by mistake, the picture would become abnormal in black level, contrast and color. In this case, it will be recovered by re-adjustment in the specified way.
