Record with your video recorder without EasyLink
To record S-VHS quality, connect a S-VHS peripheral directly to the video recorder. 1. Record a TV programme using only an aerial cable
� �
Select the programme number on your video recorder. Set your video recorder to record. (See the handbook for your video recorder.) Switching programme numbers on your TV does not disturb recording ! using a eurocable connected to the euroconnector EXTERNAL 2 With a video recorder connected to EXTERNAL 2 it is possible to record a programme from your TV as well as from other connected equipment. using a eurocable connected to the euroconnector EXTERNAL 1 With a video recorder connected to EXTERNAL 1 you can only record a TV channel.
� � �
Select the programme number on the TV. Select the right external on your video recorder. Set your video recorder to record. You record what you are watching on the screen. Do not switch programme numbers or do not switch off your TV when you are recording ! 2.
� �
Select the programme number on the TV. Set your video recorder to record. Switching to a programme from a connected peripheral equipment does not disturb recording .
Record a programme on your video recorder connected to EXTERNAL 2 from Audio/Video equipment connected to EXTERNAL 1, EXTERNAL 3 or FRONT Switch on the equipment. Select the right external on your video recorder. Set your video recorder to record. You record what you are watching on the screen. Do not switch programme numbers or do not switch off your TV when you are recording ! To watch TV programmes again, press twice the programme number you want to select. Then the recording is stopped and your video recorder switches to standby.
� � �
Record with a video recorder with EasyLink
If you have connected a S-VHS video recorder provided with the EasyLink function, you can record S-VHS-quality from a S-VHS peripheral connected to the front side of the TV. (E.g. from a S-VHS camcorder.) It is possible to start a direct recording of the programme which is being displayed on the TV screen. Press at the same time the VCR key on the left side and the ®S key of the remote control. The video recorder switches on when it was in standby and a message of what is being recorded appears at the bottom of the screen. The video recorder starts recording the programme that appears on the screen. Press the �q key to stop the recording. When recording a programme from a peripheral connected to EXTERNAL 1, 3 or FRONT, you can not select another TV programme on the screen. To watch TV programmes again, press twice the programme number you want to select. Then the recording is stopped and your video recorder switches to standby. If you switch to standby during recording a programme from a peripheral connected to EXTERNAL 1, 3 or FRONT, the blinking red lamp on the front of your TV indicates that you are still recording. The blinking stops after the recording is finished.
18
