PHILIPS 32PW6305/05
Instrukcja Obsługi

Quick installation
The first time you switch on the television, a menu appears on the screen and the tuning starts automatically.
SELECT LANGUAGE LANGUAGE COUNTRY

The operation takes several minutes. A display shows the search status and the number of programmes found.When it has finished the menu disappears. To exit or interrupt the search, press the H key. If no programmes are found, refer to the chapter entitled Tips on p. 16. & If the transmitter or the cable network broadcasts the automatic sort signal, the programmes will be correctly numbered. é If not, the programmes found will be numbered in descending order starting at 99, 98, 97, etc. Use the SORT menu to renumber them. Some transmitters or cable networks broadcast their own sort parameters (region, language, etc.). Where this is the case, make your choice using the IJ keys and confirm with L.

� ENGLISH DANSK NEDERLANDS FINNISH FRANCAIS

AUSTRIA BELGIUM SWITZERLAND GERMANY DENMARK

SEARCHING PLEASE WAIT PROG. NO. 2 215.18 MHZ

If the menu does not appear, hold down the � and � + keys on the set for 5 seconds to start the tuning.

Sorting programmes
& Press the H key.The main menu is displayed. é Select INSTALL (J), then press L. The INSTALL menu appears.
� PICTURE � SOUND � FEATURES � INSTALL

INSTALL � � � � LANGUAGE COUNTRY AUTO STORE MANUAL STORE FROM TO EXCHANGE

� Select the programme you wish to renumber using KL keys or 0 to 9. Example: to renumber programme 78 as 2 press 7 8. ( Select TO (using J key) and enter the new number with KL keys or 0 to 9 (for the example given, enter 2). § Select EXCHANGE (J key) and press L. The message EXCHANGED appears, the exchange takes place. In our example, programme 78 is renumbered as 2 (and programme 2 as 78). è Select the option FROM (I key) and repeat stages � to § as many times as there are programmes to renumber. See also: EasyLink function below. ! To exit from the menus, press R.

� SORT � NAME

� Using the J key, select SORT then press L. The SORT menu appears.The FROM option is activated. Note: this menu works as follows: � Change "FROM" (enter the current programme number), � "TO" (enter the new number), � EXCHANGE numbers" (the operation is carried out).

EasyLink function
If the set is connected (by the EXT2 socket) to a video equipped with the EasyLink function, the language, country and channels found are automatically transmitted to the video recorder at the time of installation.A message is displayed on-screen during loading. The list of video recorder channels is then the same as those of the set. The EASY LINK setting in the OPTIONS menu must be set to ON (default setting), see page 10.

4