Documentation made available quickly and It is good quality. Thanks.
Tekstowy podgląd strony 27 (kliknij aby zobaczyć)
11. Removing the chassis frame
1) Remove the back cover. (Refer to Item 1.) 2) Remove the speakers. (Refer to Item 2.) 3) Remove the top shield bracket. (Refer to Item 3.) 4) Remove Power Module unit. (Refer to Item 4.) 5) Remove the Scaler board. (Refer to Item 5.) 6) Remove the D-Rewrite board and bracket. (Refer to Item 6.) 7) Remove the back plate. (Refer to Item 7.) 8) Remove the TU/AOUT, AV2 and Signal boards. (Refer to Item 8.) 9) Remove the Front/AV board. (Refer to Item 9.) 10) Remove the Power SW and LED/RMT boards. (Refer to Item 10.) 11) Remove 10 screws (PBI 4x12) and 8screws (PP 4x10), then remove the chassis frame.
