he TV�s audio/video input jacks are for direct picture and sound connections between the TV and a VCR (or similar device) that has audio/video output jacks. Follow the easy steps below to connect your accessory device to the AV 1 Input Jacks located on the back of the TV.
NOTE: Repeatedly pressing the SOURCE button on the remote control will toggle the picture source from the current channel, the AV 1 channel, then the CVI channel, then the AV 2 channel, then the AV 3 (side) channel, then the Tuner A channel and the Tuner B channel.
BACK OF TV
1 2 3 4 5 6 7
Connect the VIDEO (yellow) cable to the VIDEO AV 1 in jack on the back of the TV. Connect the AUDIO (red and white) cables to the AUDIO (left and right) AV1 in jacks on the rear of the TV. Connect the VIDEO (yellow) cable to the VIDEO OUT jack on the back of the VCR.
8
TUNER-B 6 TUNER-A
AV 3
2
AV 2 CVI
1
AV 1
Connect the AUDIO (red and white) cables to the AUDIO (left and right) OUT jacks on the rear of the VCR. Turn the VCR (accessory device) and the TV ON. Press the SOURCE button on the remote control to select the AV 1 channel. AV 1 will appear in the upper left corner on the TV screen. With the VCR (or accessory device) ON and a prerecorded tape (CD, DVD, etc.) inserted, press the PLAY button to view the tape on the television.
BACK OF VCR
AUDIO IN (RED/WHITE) VIDEO IN (YELLOW)
ANT/CABLE OUT
S-VIDEO OUT
R
L
VIDEO OUT
AUDIO OUT
4
VCR (EQUIPPED WITH VIDEO AND AUDIO OUTPUT JACKS)
3 7
c CHECK IT OUT
Repeatedly pressing the SOURCE button on the remote control will toggle the picture source from the current channel, then AV 1, CVI, AV 2, AV 3 (Side), Tuner A channel and the Tuner B Channel Input connections.
