WHIRLPOOL 3LA5800XKW1
Instrukcja Obsługi

For Rinsing Only
Your washer can be set to rinse only Use the setting for an extra rinse, or for laundry that only needs a rinse and sprn There IS a dot just after the numbers In PERMANENT PRESS, REGULAR HEAVY and KNITS GENTLE. If you push In on the Cycle Control Knob, turn the pointer to one of those dots and pull the Control Knob out, the washer WIII fill, agitate, drain and sprn If you want hrgh agitatron and sprn, use the dot In REGULAR HEAVY. If you want low agitation and spin, use the dot in KNITS GENTLE Use the dot In PERMANENT PRESS if you want high agitation and a low-speed spin

For Spinning Only
There may be times when you want to dram out all the wash water and start over. To stop the washer at any time, just push In on the Cycle Control Knob To set the washer so it drains and spans water out of the load, push in on the Control Knob, turn the dial to the right (clockwise) so the pointer IS touching the bar just before OFF in any cycle The washer WIII drain, spin out water and stop. If You want a lowspeed spin, use the bar on PERMANENT PRESS or KNITS GENTLE All the other cycle settings have a hrgh-soeed

Water levels and load Sizes
The LOAD SIZE SELECTOR lets you control the amount of water that fills the washer. The selector can be set at any water level between HANDWASHABLE and EXTRA LARGE. WATER LEVELS Setting Gallons/Liters� HANDWASHABLE 7.8/29.5 MEDIUM 13.9/52.6 EXTRA LARGE 20.5i77.6 *Approximate fill with load. To change the water level setting, move the LOAD SIZE SELECTOR to RESET.Then move it to the setting you want. To save water and energy, match the water level to the load size.

For the best cleaning results, the load should move freely in the water. Watch for rollover. An item (like a sock] should sink in the middle and come up later on the outside. Be sure to read pages 11 13 in your laundry Guide. You will find more information on loading and load sizes.