WHIRLPOOL 445 352 80
Skrócona Instrukcja Obsługi

HOO 504 - 505 - 545 PRODUCT DESCRIPTION SHEET
CONTROL PANEL
4

A. Light switch. B. Speed selector.

1 2 2 3

A
OI O123

B

1. 2. 3. 4.

Control panel Grease filter Lighting unit Telescopic flue

small amount of steam and fumes medium amount of steam and fumes large amount of steam and fumes

REMOVING AND RENEWING OR CLEANING THE GREASE FILTER:
1. Unplug the appliance or switch off the mains power supply. 2. a - push the handles backwards b - and then downwards. 3. After substituting or cleaning the grease filter (depending on model) remount in reverse order, making sure the entire extraction surface is covered.

MOUNTING OR REPLACING THE CARBON FILTER:
1. Unplug the appliance or switch off the mains power supply. 2. Removing the grease filters. 3. If the carbon filters are already mounted (two filters covering the motor-blade grille) and need substituting, turn the central handle anticlockwise until the filters release. 4. If the filters are not mounted, fit one on each side covering both the motor protection grilles. Turn the central filter handle clockwise. 5. Refit the grease filters.

REPLACING BULBS
1. Unplug the appliance or switch off the mains power supply. 2. Remove the grease filters. 3. Remove the lighting unit from the clips that fix it to the hood body. 4. Remove the burnt-out bulb. Use 40W max (E14) bulbs only. 5. Remount the lighting unit

D
5019 100 75003/A

GB

F

NL

E

P

I

GR

S

DK

N

FIN
LI01SA