6. Select the programme and start the machine
Turn the programme selector dial clockwise to the required programme and press the ON/OFF button : the mains on light comes on and the machine starts to operate.
7. At the end of the programme
The machine stops automatically. 45 S 508 D - 45 S 551 D If you have selected a programme which ends with the water of the last rinse left in the tub (programmes G - H - K - L - M), drain the water before opening the door. Select programme �N� (drain) or �J� (short spin). 45 S 651 D If you have selected option , the water of the last rinse must be emptied out by selecting programme �N� (drain) or by depressing button again (after draining, the spin will performed).
B
P0954S
T0003
Important! � Do not try to open the door while the machine is in operation. If you need to open after the machine has been switched on, first switch it off and wait of about two minutes. � When opening the door, be careful, as the water level may be high and water may pour out when you open the door.
Wait one or two minutes before opening the door to give the electric locking mechanism time to release it. This is a safety feature to ensure that the wash bowl has finished spinning. Depress the ON/OFF button again to switch the machine off. The mains on light goes out. Remove the laundry. Turn the drum by hand to make sure it is completely empty, so as to avoid any forgotten items being damaged in a subsequent wash (e.g. shrinking) or their colour running into a load of whites. Release any buttons which have been pressed. Turn the water taps off and unplug the machine. Leave the door ajar to air the machine.
