4. Align the perforations at the bottom of the first form with the pointers on the upper tractor doors by using the � arrow or � arrow pushbuttons. Refer to Top View illustration in Step 2, page 12, for location of the top of form alignment notches on the 5180 model.
5. If the same type of paper has been loaded, reset the print gap wheel and the paper tension lever to their prior positions. Refer to Top View illustration in Step 2, page 12, for location of the print gap adjust knob and paper tension lever on the 5180 model.
6. To accommodate a different width of paper, release the right tractor lock by pushing down on the small black lever. Load the paper onto the tractor pins and close the tractor door. Slide the tractor to the right to remove slack, then lock the tractor again and close the door. Refer to Top View illustration in Step 2, page 12, for location of the tractor locking lever on the 5180 model.
Tractor Lock Lever
�
If another type of paper has been loaded, use the following guidelines for the proper settings of the print gap and paper tension:
