HITACHI 50GX20B
Instrukcja Obsługi

HOW TO USE THE GENIUS REMOTE TO CONTROL YOUR TV

Press this button when a menu is displayed to view HELP text, which gives a description of the displayed menu. The HELP text will be displayed every time a MENU is displayed, until htis button is pressed again.

(5) LAST CHANNEL (LST-CH) Button Use this button to select between the last two channels viewed. (Good for watching two sporting evens, etc.).

(6) VOLUME, MUTE Buttons Press the VOLUME up ( ) or down (

) button until you obtain the desired sound level.

To reduce the sound to one half of normal volume (SOFT MUTE) to answer the telephone, etc., press the MUTE button. Press the MUTE button again to turn the sound off completely (MUTE). To restore the sound, press the MUTE button one more time, or press the VOLUME up ( ) button.

(7) CHANNEL SELECTOR Buttons CHANNEL SELECTOR buttons are used to set FAMILY FAVORITES, CHANNEL MEMORY, etc. Enter two or three numbers to select channels. Enter "0" first for channels 1 to 9 . For channels 100 and above, press the "1" button, wait until another dash appears next to the channel display on your TV, then enter the remaining two numbers using the number buttons. Channel selection may also be performed by pressing CH up ( ) or down ( ). NOTE: The TV may not receive some channels if you are not in the correct SIGNAL SOURCE mode. (See page 32.) (8) EXIT/RECALL button Press this button when no menu is displayed, when you want to check the channel being received, the picture source, or if the channel has stereo (ST) or second audio (SAP). You can also check the time, CHANNEL ID, and if the SLEEP timer is set. When in MENU mode, this button will exit all ON-Screen Displays.

28