...instrukcja serwisowa w pełni czytelna i kompletna. Dziękuję!
Tekstowy podgląd strony 11 (kliknij aby zobaczyć)
1.
Turn off the TV and unplug the power cord.
5.
Grasp the lamp unit handle and gently pull the lamp unit straight out of the TV. Set the old lamp unit aside.
2.
STOP! Allow the lamp to cool for at least one (1) hour before replacing it.
Note: Wear solt, lint-free gloveswhen replacing the lamp unit.
6. 3. On the lamp unit door on the side of the TV, loosen the screw using a manual screw driver, and then remove the lamp unit door.
TV back
Carefully insert the new lamp unit straight into the TV until it is fully seated.
Lamp unit door detail
loosen screw using manual screwdriver
Note : Never subject the lamp unit to excessive shock. Never touch the lamp unit glass or otherwise get it dirty. Doing so may affect the image quality and reduce the service life of the lamp. See �Cleaning the lamp unit glass� below. 7. Using a manual screwdriver, tighten two lamp unit screws. Note:Hand-tighten only. Do not use an electric screwdriver.
4.
Using a manual screwdriver, loosen the two screws on the lamp unit.
Lamp unit screws (use manual screwdriver only)
Lamp unit screws
