PREPARATION FOR USE
CONNECTIONS
Plug the incoming cable into the ANT. IN jack on the rear of the TV.
UHF/VHF Rod Antenna (Not supplied) Rear of this TV
INSTALLING THE BATTERIES
1
2
3
Install two AA batteries (supplied) matching the polarity indicated inside battery compartment of the remote control.
Cable TV signal
OR
Antenna
Incoming cable from home Antenna / Cable Company (No Cable Box) Cable Box or Satellite Box* OR
IN OUT
[BATTERY PRECAUTIONS] � Be sure to follow the correct polarity as indicated in the battery compartment. Reversed batteries may cause damage to the device. � Do not mix different types of batteries together (e.g. Alkaline and Carbon-Zinc) or old batteries with fresh ones. � If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage. � Do not try to recharge batteries not intended to be recharged; they can overheat and rupture.
ANT. IN
Incoming cable from Cable Company or Satellite Antenna
OPERATIONS
REMOTE CONTROL AND FRONT PANEL FUNCTION
*Note (DO NOT DISCONNECT FROM BOX) Some cable TV systems use scrambled signals and require a special converter to receive these channels. Consult your local cable company. GAME button
POWER GAME SLEEP DISPLAY
POWER button To turn TV on/off Channel number buttons
1 4 7
2 5 8 0
3 6 9 +100
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. ATTENTION: POUR �VITER LES CHOC �LECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU�AU FOND. Note: � For your safety and to avoid damages to the unit, unplug the antenna cable from the ANT. IN jack before moving the unit.
CHANNEL RETURN
CH �/� buttons To select channels
INPUT SELECT
SLEEP button DISPLAY button To display CH No./Audio Status CHANNEL RETURN button To return to previous channel INPUT SELECT button To select TV or external input
Rear of this TV S-Video Cable
(OUT) (IN)
L AUDIO IN R
(IN)
ANT.IN
Audio Cable Video Cassette Recorder
S-VIDEO
Note: � The AUDIO L jack is for mono input. The sound is heard from both speakers. Use this jack for connecting monaural audio equipment.
MENU VIDEO L AUDIO R HEADPHONE VOLUME CHANNEL POWER
VIDEO2 input (Front)
MENU VOLUME CHANNEL POWER
ex.
VIDEO
L
AUDIO
R
HEADPHONE
(OUT)
Audio Cable
(OUT) (IN)
VIDEO L AUDIO
(IN)
Infrared Sensor Window POWER button To turn TV on/off CHANNEL �/� buttons To select channels VOLUME X/ Y buttons To adjust volume MENU button To view on-screen menu HEADPHONE jack AUDIO L/R input jacks VIDEO input jack Note: � If some digits appear in the corner of the screen when the unit is turned on for the first time, press [POWER] without unplugging the power cord.
Video Camera Video Game Video Cable
R
Front of this TV
Note: � The AUDIO L jack is for mono input. The sound is heard from both speakers. Use this jack for connecting monaural audio equipment.
SELECTING AUDIO/VIDEO INPUT
When you use the AUDIO/VIDEO input jacks, select �VIDEO1� or �VIDEO2� mode by pressing [INPUT SELECT] on the remote control. The input mode changes by pressing the button as following:
INPUT SELECT
TV channel
VIDEO1 (Rear)
VIDEO2 (Front)
SLEEP TIMER SETTING
1
SLEEP
� To use the jacks on the rear of the TV, select �VIDEO1�. � To use the jacks on the front of the TV, select �VIDEO2�.
SLEEP 0
2
SLEEP
Notes: � When you disconnect the unit from the AC outlet or when you have a power failure, the sleep time will be lost. � To cancel the sleep timer, press [SLEEP] repeatedly until �SLEEP 0� is displayed. � The Sleep Timer Setting display will disappear automatically after 10 seconds of the operation.
