SONY 655703S
Instrukcja Serwisowa

6557-03N/03S/43N/43S

2-7. PICTURE TUBE REMOVAL

4 2

Three connectors CN2 (DY) GND (DY) CN4 (DY)

Two screws (+ BVTT 4 x 8)
3

A board

1

Anode cap

6 7

Neck assy

Deflection yoke

5

Picture tube

� REMOVAL OF ANODE-CAP
NOTE: Short circuit the anode of the picture tube and the anode cap to the metal chassis, CRT shield or carbon painted on the CRT, after removing the anode.

� REMOVING PROCEDURES
c

b
a

Anode Button

1 Turn up one side of the rubber cap in the direction indicated by the arrow a.

2 Using a thumb pull up the rubber cap firmly in the direction indicated by the arrow b.

� HOW TO HANDLE AN ANODE-CAP
1 Don�t hurt the surface of anode-caps with shartp shaped material! 2 Don�t press the rubber hardly not to hurt inside of anode-caps! A material fitting called as shatter-hook terminal is built in the rubber. 3 Don�t turn the foot of rubber over hardly! The shatter-hook terminal will stick out or hurt the rubber.

3 When one side of the rubber cap is separated from the anode button, the anode-cap can be removed by turning up the rubber cap and pulling up it in the direction of the arrow c.

2-4