PHILIPS 8170XL/43
Instrukcja Obsługi

8170XLDFU-01_31_05Norelco.qxd

2/11/05

3:56 PM

Page 20

(Zwart plate)

20

ENGLISH

C

5

Separate the cutter from the comb and rinse clean under hot water.

Do not clean more than one cutter and comb at a time, since they are all matching sets. If you accidentally interchange the cutters and combs, it could take several weeks before optimal shaving performance is restored.

C

Replace the set back into the Razor Head Assembly so that the �wings� on the comb fit within the brackets located towards the center of the Assembly. The set will only fit into the Razor Head Assembly if the �wings� are between the brackets. Make sure that the two pointy edges of the head fit exactly into the recesses.
7

6

Repeat the process for the other two sets of cutters and combs. Replace the frame. Press down (1) and turn wheel clockwise (2) until it locks into place.

8

C

9

10

Close the Razor Head Assembly.