Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 14 (kliknij aby zobaczyć)
To reinstall shelf: 1. Hold shelf at front and back. 2. Tilt front of shelf up to a 45� angle to track. 3. Insert both rear shelf slides into upper channel of track. 4. Lower front of shelf to a level position. Make sure both rear shelf slides are securely in the track before letting go of shelf.
NOTE: Insert rear shelf slides into upper channel of track. /
Removing
the crisper
and crisper
cover
Pull out to the stop, lift the front, and pull again.
To remove the crisper: Slide the crisper straight out to the 1. stop. 2. Lift the front slightly. 3. Slide out the rest of the way. 4. Replace in reverse order.
Style
I
To remove the cover: 1. Hold cover firmly with both hands and lift front of cover off supports. 2. Lift cover out by pulling up and out. To replace the cover: 1. Fit back of cover into notch supports on walls of refrigerator. 2. Lower front into place.
Lift the cover front, then the back.
Style
2
To remove the cover: 1. Push up glass insert from the bottom, then slide out with both hands. 2. Lift front of cover frame. 3. Lift cover frame up and out. To replace the cover: 1. Fit back of cover frame into notch supports on walls of refrigerator, then lower front into place. 2. Slide back of glass insert into place, then lower front into place.
