AEG 95753G-BE
Instrukcja Obsługi

Description of the appliance
1 2 4 2 3
1. Hob top 2. Semi-rapid Burner 3. Auxiliary Burner 4. Rapid Burner 5. Control knobs

2 5

Instruction for the User
Hob burners control knobs
The symbols on the knobs mean that : l there is no gas supply there is maximum gas supply there is minimum gas supply

Lighting the burners
For easier lighting, proceed before putting a pan on the pan support.

Fig. 1 A - Burner cap B - Ignition candle C - Thermocouple

F

To light a burner, turn the relevant knob anticlockwise to maximum position and push down the knob to ignite. After lighting the flame, keep the knob pushed down for about 5 seconds. This will allow the "thermocouple" (Fig. 1-lett. C) to be heated and the safety device to be switched off, otherwise the gas supply would be interrupted. Then, check the flame is regular and adjust it as required. If you cannot light the flame even after several attempts, check the "cap" (Fig. 1- lett. A) is in the correct position. To put the flame out, turn the knob to the symbol l. Always turn the flame down or put it out before taking the pans off the burner.

18