|
Dla tego produktu nie napisano jeszcze recenzji!
®������®
Expandable C0ntroller
A-70
TurboStart
Viewing Patch Names of External Devices
The A-70 allows you to display Patch Names for many devices using bank select MSB and LSB messages. Use the following procedure to display the Patch Names for the Roland SC-55: 1. Double-click the EDIT button. 2. Type 0,2 on the 10-key pad and press ENTER. 3. Under ZONE, press EXT A so that it is lit. 4. Use the INC/DEC buttons to select #6 (SC-55). 5. Press EDIT so it is off. 6. Under DESTINATIONS, press EXT. 7. Under PARAMETER SELECT, press BANK SELECT. 8. Cursor up to display BM in upper the left corner. 9. Cursor left to select ZONE A. 10. Press 0 on the 10 Key pad. 11. Cursor down to display BL in the upper left corner. 12. Press 0 on the 10 Key pad. 13. Under PARAMETER SELECT, press PGM CHANGE. 14. Use the INC/DEC buttons to select the desired Tones. The Tone names will be displayed.
Soloing Zones / Outputs
Use the following procedure solo a Zone or Output: 1. Double click the desired ZONE or OUTPUT button. 2. Double click a second time to return to the previous settings.
TBS71
© 1999 Roland Corporation U.S., 5100 S. Eastern Ave., Los Angeles CA 90040
Faxback # 20068
Page 2
|
