ONKYO A-9355
Instrukcja Obsługi

Enjoying Audio Sources�Continued
Listening to Components
Input selector Volume

3

A-9355/ A-9155

To adjust the volume, use the A-9355/A-9155�s Volume control, or the remote controller�s VOLUME [ ]/[ ] buttons. Turn Volume control clockwise to increase the volume or counterclockwise to decrease the volume.

Remote controller

INPUT / VOLUME /

MUTING

Muting the A-9355/A-9155 (remote controller only)
You can temporarily mute the output of the A-9355/A-9155.

1
A-9355/ A-9155

Remote controller

Turn the input selector to select the component that you want to listen to. LINE/MD (A-9355): Select to listen to the component connected to the LINE/MD jacks. DOCK (A-9355): Select to listen to the component connected to the DOCK jacks. LINE/DOCK (A-9155): Select to listen to the component connected to the LINE/DOCK jacks. PHONO: Select to listen to the turntable connected to the PHONO jacks. CD: Select to listen to the component connected to the CD jacks. TUNER: Select to listen to the component connected to the TUNER jacks. TAPE: Select to hear the component connected to the TAPE IN jacks. When selecting with the remote controller, use the INPUT [ ]/[ ] buttons.

1

Press the remote controller�s [MUTING] button. The A-9355/A-9155 is muted. The MUTING indicator �ashes.

To unmute the A-9355/A-9155, press the [MUTING] button again. Note: The Mute function will be cancelled if the remote controller�s VOLUME buttons are pressed.

Using Headphones
You can connect a pair of stereo headphones (1/4-inch phone plug) to the A-9355/A-9155�s PHONES jack for private listening.

2

Start playback on the selected component.

Notes: � Always turn down the volume before connecting your headphones. � (A-9355) All connected speakers are turned off while the headphones plug is inserted in the PHONES jack. � (A-9155) All connected speakers are not turned off even when the headphones plug is inserted in the PHONES jack. Press the SPEAKERS [A] or [B] button to mute the speakers.

15