Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 2 (kliknij aby zobaczyć)
TROUBLESHOOTING 1. Unscrew the housing from the miniature plug on the A96F to expose the wires inside the connector.
2. Use wire clippers to cut and remove the wire between the tip and ring leads (see figure below). Make sure to remove the wire completely from between the leads so that there is no contact between the tip and ring. 3. Reassemble the plug.
Remove wire here RING
�� ��
TIP
If the microphone still does not work, contact Shure Application Engineering at 1-800-516-2525. Please have the camcorder user's guide available.
