WHIRLPOOL ACF7225AW
Instrukcja Obsługi

Using the Oven Control (cont�d)
! WARNING
Delayed Self-clean Cycle

To avoid risk of personal injury, do not touch oven vents, or area around vents, during self-cleaning. These areas can become hot enough to cause burns.

! CAUTION
To avoid fire or smoke damage, � remove any flammable materials from storage drawer. Items like plastic containers and paper manuals can melt or burn. � clean excess spills before starting a self-clean cycle.

Self-clean feature uses high oven temperature to clean oven interior. Set oven to begin and end cleaning at later time. Range control begins the self-clean at your specified start time. 1. Prepare oven for self-cleaning (see below left). Oven bottom recess must be checked for grease build up before beginning a self-clean cycle. See Care and Cleaning. 2. Close door. 3. Press START COOK/CLEAN pad. 4. Set starting time for the cleaning cycle. � Default time is current time of day. � Start time can be set from current time to current time plus 11 hours and 59 minutes. 5. Turn oven temperature knob to CLEAN. � Default self-clean cycle length of 3 hours will display. 6. Set cycle length for self-clean. � Use arrow keys to adjust time as necessary. � Clean cycle can be set from two to four hours in five minute increments. 7. Self-clean cycle is set. � DO NOT use oven light during a self-clean cycle. � Oven cannot be used until completion of the self-clean cycle. � Self-clean cycle will begin at selected start time. � To view start time, press the START COOK/CLEAN pad. � OVEN ON indicator light will turn on when the self-clean cycle begins and will remain on until the end of the cycle. � To view the clean cycle time, press the COOK/CLEAN TIME pad. � At the end of the self-clean cycle, OVEN ON indicator light shuts off and the oven does not maintain its high temperatures. Oven will still be hot, however. � The LOCKED indicator light will remain on until oven reaches a cooler temperature. LOCKED light will flash while door is unlocking, and then shut off when door has unlocked. Oven cavity will be hot to the touch. DO NOT attempt to open door prior to LOCKED indicator light shutting off. Once oven is cool, turn oven knob to OFF position.

To avoid risk of personal injury, property damage, or fire, clean excess grease and soil from oven before beginning a selfclean cycle.

! WARNING

Do I need to prepare?
To get the best results from the self-clean cycle, follow these steps: � � Clean excess spills from oven interior and bottom thoroughly. Remove birds or animals susceptible to smoke or other fumes from the room or adjoining room. Open window if possible. Make sure oven light cover is properly in place. Do not use cleaning cycle if it is not.

� �

Interrupting the self-clean cycle

To stop a self-clean cycle that has already started follow these steps. If the interruption occurs mid cycle, the oven will remain locked, even though the cycle has stopped, until the oven cavity has cooled to a safe temperature. 1. Turn oven temperature knob to OFF position. 2. When oven has cooled to a lower temperature, LOCKED light shuts off. Door can be unlocked. DO NOT force door. This can cause damage to the latch.

� �

�

Remove oven racks and all cooking utensils from oven. Remove items from range top backguard and storage drawer. These areas can become hot during self-cleaning cycle. The range vents from the center bottom of the backguard. Make sure this area is unobstructed by removing all items from backguard and range top.

16