MAINTENANCE AND CLEANING
Before cleaning or carrying out maintenance, switch off the appliance, disconnect the mains plug. 1. Clean the appliance exterior with a neutral detergent. Do not use abrasive detergents. 2. Regularly wipe the door seal and inside of the door with a damp cloth to remove any food residues.
If the spray nozzles become clogged with food residues (clean the spray arms as follows). 1. Unscrew the securing wing-nuts. 2. Remove the spray arms. 3. Clean them under running water. 4. Remount the spray arms and tighten the nuts. Note: Do not interchange the upper and lower spray arms. The spray jets must point upwards.
Cleaning the soil filter: If necessary, the filter can be cleaned after each wash programme as follows: 1. Remove the lower rack. 2. Release and pull out the filter. Separate the fine filter from the coarse filter. 3. Clean all the components. 4. Reassemble and reposition.
