Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 110 (kliknij aby zobaczyć)
What to do If Something Goes Wrong
A If
the duplex unit is installed, open the duplex unit by pushing the catch upwards.
D While pressing the green button,
slide the photo conductor unit out until it stops.
3
B Open the right cover of the machine by pushing the catch upwards.
E Raise the green handle and slide
the photo conductor unit out until it stops.
C Open the front cover.
Important � Do not tilt or drop the removed photo conductor unit. Moving the unit abruptly can scatter the toner.
� While the photo conductor unit is removed, do not change the toner.
F Take
the new photo conductor unit from the box and remove the plastic bag, holding the handle.
Important � Do not drop or damage the removed photo conductor unit.
� Do not touch the side of the photo conductor unit.