Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 45 (kliknij aby zobaczyć)
2. COPYING
BASIC PROCEDURE
A When the machine is set for user
code, enter the user code with the {Number} keys and then press the {#} key.
Reference
F Enter
eed Dial
the number of copies required with the {Number} keys.
1 4 7
2 5 8 0
3 6 9
C
Hook Dial
See � P.63 �User Codes�.
B Make sure that the machine is in
Copy mode.
use / dial
ne
ND2R02EE
Note � If not, press the {Copy} key.
Note � The maximum copy quantity can be set between 1 and 999 (default: 999). See �05. Max.
C Make sure that there are no previous settings remaining.
Note � To clear settings, press the {Clear Modes/Energy Saver} key.
Copy Q'ty� in � P.152 �1. General Features 2/4�. � To change the number entered, press the {Clear/Stop} key and enter the new number.
D Set your originals.
Reference See � P.31 �Setting Originals�.
G Press the {Start} key.
The machine starts copying.
Note � To stop the machine during the
E Set your desired settings.
multi-copy run, press the {Clear/ Stop} key. � To return the machine to the initial condition after copying, press the {Clear Modes/Energy Saver} key.
