Copying onto non-standard size paper with the bypass tray
Preparation � You can register non-standard paper sizes you use often in keys [Custom 1], [Custom 2], and [Custom 3] with the user tools. See page 126. Note � Be sure to set the size. Otherwise, a paper misfeed might occur.
1 Open the bypass tray. 2 Select one of desired paper types or 3 Press the [Custom] key.
settings with the keys.
TRSS100E
TRSS111E
4 Select [Custom1], [Custom2], [Cuskeys. Then press the [OK] key. Note � If you select [Custom1], [Custom2] or [Custom3] go to step 8. enter the vertical paper size with the Number keys, then press the # key. Note � To change the value entered, press the Clear/Stop key and enter the new value. or
Copying 39
TRSS100E TRSS115E
tom 3] or [Imput Size] with the
5 If you select [Imput Size] in step 4,
6 the Number keys, paperpresswith Enter the horizontal size then the
[OK] key.
