Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 13 (kliknij aby zobaczyć)
Preparation
Mounting the unit on a tripod
Use the tripod attachment to mount the unit on a tripod.
Attaching the viewfinder and microphone
For details on the attachment and adjustments of the viewfinder and microphone, refer to the operating instructions of the viewfinder.
1 Mount the tripod attachment on the tripod.
Tripod attachment
Attaching the shoulder belt
Tripod head Shoulder belt
<Note>
Take account of the center of gravity of the unit and that of the tripod attachment when selecting the attachment hole. Check that the diameter of the hole selected matches the diameter of the tripod head screw.
The tab opens when it is pressed.
2 Mount the unit on the tripod attachment.
To disengage the shoulder belt, open the tabs of the attachment parts, and disengage.
The tab opens when it is pressed.
<Note>
Check that the shoulder belt is attached securely.
Slide the unit along the groove toward the front until it clicks into place.
Attaching the wireless receiver (optional accessory)
Detaching the unit from the tripod attachment
Tripod attachment
Red lever
Black lever
While pushing down the red lever, move the black lever in the direction of the arrow and slide the unit toward the back to remove it.
<Note>
If the pin of the tripod attachment fails to return to its original position after the unit has been detached, again move the black lever in the direction of the arrow while pushing down the red lever, and return the pin to its original position. Bear in mind that the unit cannot be attached if the pin remains in the center. Remove the cover, insert the wireless receiver, and screw it down.
