Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 30 (kliknij aby zobaczyć)
Basic operations
� Shuttle (SHTL)
SHTL
(1) The unit is placed in the shuttle mode when the SHTL button is pressed and the lamp lights. (2) Turn the search dial. �The tape speed changes depending on the angle by which the dial is turned. �The tape speed is displayed on the search indicator. �The tape speed can be varied up to a maximum of n 50 times the normal tape speed. �The maximum speed can be set by pressing the F6 (SHTL MAX SP) key on the PANEL SET UP menu.
(3) When the STOP, FF, REW, PLAY, JOG, or VAR button is pressed, operation is directly transferred to the mode that corresponds to the respective button.
� Jog
(1) The unit is placed in the JOG mode when the JOG button is pressed and the lamp lights.
JOG
(2) Turn the search dial. �When the dial rotation is stopped, the unit is placed in the stillpicture (STILL) mode. �The tape protection mode is established after the still-picture holding time has elapsed. (This time can be set using the F12 (STILL) key on the HOME SET UP menu and the ADJUST control.) �The tape speed changes depending on the speed by which the dial is turned. �The tape speed ranges from j2 times to i2 times of the normal tape speed. In the range from j1 to i2 times of the normal tape speed, the audio signals for all channels are output from the AUDIO OUT connectors. (3) When the STOP, FF, REW, PLAY, SHTL, or VAR button is pressed, operation is directly