Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 20 (kliknij aby zobaczyć)
HOME SET UP menu
� Reference
OUT REF: This sets the video output signal reference. AUTO: When the REF VIDEO connector input signal is available, the output reference is locked to REF VIDEO; when it is not available, it is locked to the INPUT input signal. When neither the REF VIDEO nor INPUT input signal is available, the internal signal serves as the reference. Depending on the format, the sequence of priority is as follows: HD mode: HD REFNSD REFNINPUTNFREE SD mode: SD REFNHD REFNINPUTNFREE INPUT: When the INPUT input signal is available, the output reference is locked to the INPUT signal; when it is not available, the internal signal serves as the reference. HD REF: When the HD REF input signal is available at the HD REF IN connector, the output reference is locked to the REF signal; when it is not available, the internal signal serves as the reference. SD REF: When the SD REF input signal is available at the SD REF IN connector, the output reference is locked to the REF signal; when it is not available, the internal signal serves as the reference. Operation (1) Press the center cursor key. The cursor now appears. Center cursor key
Cursor key (2) Move the cursor to the item to be set using the cursor keys. The selected item now blinks.
OUT REF: INPUT
(3) Press the ENT key. The setting is now entered.
°In the 720/59p mode, use the SD REF for synchronization with an external component. (In this mode, SD REF or SF FREE is used.) °When AUTO has been set, the sequence of priority is as follows: SD REFNFREE.
