Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 14 (kliknij aby zobaczyć)
Operation Procedure
1 Turn on the power of each equipment. 5 Adjust the black balance. � This adjustment is needed when the 2 Properly adjust the light for the obcamera is used for the first time or afject.
3 Adjust the flange back of the lens, the
iris and the focus. � Flange back must be adjusted when the camera is used for the first time or after replacement of the lens.
ter leaving unused for a long time. � The adjustment is necessary when the ambient temperature is greatly changed or at the change of season. � After adjusting the black balance once, re-adjustment is not needed under the same condition.
4 Adjust the white balance.
� This adjustment is needed when the camera is used for the first time or after leaving unused for a long time. � The adjustment is necessary when the lighting condition or brightness is changed. � After adjusting the white balance once, re-adjustment is not needed under the same condition.
6 Start shooting.
(After shooting, be sure to turn off the power of each equipment connected.)
