Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 13 (kliknij aby zobaczyć)
How to Connect
_Lens connection in the case of no swivel stand
_How to mount the lens
� A lens of any maker�s can be used provided that it is a bayonet type (B4 mount) lens of 2/3 inch standard.* 1 Turn the lens fixing ring knob counterclockwise and remove the lens mount cap. 2 Mount the lens and completely secure it by turning the lens fixing ring knob clockwise. 3 Connect the iris control cable to the lens connector. 4 Connect the remote (zoom/focus control) cable to the zoom/focus connector on the rear panel.
*Note that some lenses are uncontrollable with respect to zoom and focus function.
Remote (zoom/focus control) cable (Connect the cable to the swivel stand when used.)
