WHIRLPOOL ARC 7593
Instrukcja Obsługi

� Motor running time depends on different things: number of door openings, amount of food stored, temperature of the room, setting of the temperature controls. If the appliance temperature is too high: � Are the appliance controls correctly set? � Has a large amount of food been added to the appliance? � Check that the doors are not opened too often. � Check that the doors close properly. � Make sure that air flow vents inside the compartment are not blocked, as this prevents the circulation of cold air. If there is moisture build-up: � Make sure that air flow vents inside the compartment are not blocked, as this prevents the circulation of air. � Make sure that the food is properly packaged. Dry any dampness on food containers before placing them in the appliance. � Check that the doors are not opened too often. When the door is opened, humidity from the room air enters the appliance. The more often the door is opened, the faster humidity builds up, especially when the room itself is very humid. � If the room is very humid, it is normal for moisture to build up inside the refrigerator. If the doors do not open and close properly: � Check that food packages are not blocking the door. � Check that the internal parts or automatic ice maker are not out of position. � Check that the door seals are not dirty or sticky. � Ensure the appliance is level.

ELECTRICAL CONNECTION
1) For Great Britain only Warning - this appliance must be earthed Fuse replacement If the mains lead of this appliance is fitted with a BS 1363A 13amp fused plug, to change a fuse in this type of plug use an A.S.T.A. approved fuse to BS 1362 type and proceed as follows: 1. Remove the fuse cover (A) and fuse (B). 2. Fit replacement 13A fuse into fuse cover. 3. Refit both into plug.

AFTER-SALES SERVICE
Before contacting After-Sales Service: Switch the appliance on again to see if the problem has been solved. If it has not, disconnect the appliance from the power supply and wait for about an hour before switching on again. If, after performing the checks described in the Troubleshooting Guide and switching the appliance on again, your appliance still does not work properly, contact the After-sales Service, explain the problem. Specify: � the model and appliance serial number (stated on the rating plate), � the nature of the problem, � the Service number (the number after the word SERVICE on the data plate on the inside of the appliance), � your full address, � your telephone number and area code.

Important: The fuse cover must be refitted when changing a fuse and if the fuse cover is lost the plug must not be used until a correct replacement is fitted. Correct replacement are identified by the colour insert or the colour embossed in words on the base of the plug. Replacement fuse covers are available from your local electrical store. 2) For the Republic of Ireland only The information given in respect of Great Britain will frequently apply, but a third type of plug and socket is also used, the 2-pin, side earth type. 3) Socket outlet / plug (valid for both countries) If the fitted plug is not suitable for your socket outlet, please contact Whirlpool Service for further instruction. Please do not attempt to change plug yourself. This procedure needs to be carried out by a qualified Whirlpool technician in compliance with the manufactures instructions and current standard safety regulations.

Note: The direction of door opening can be changed. If this operation is performed by After-sales Service it is not covered by the warranty. 10