EXTRA SHELF (depending on the model) Your refrigerator is provided with extra wire shelf. It�s ideal to store bottles. � To use it, pull it frontward to the position indicated in the pictures. � When not in use, just pull it upward and then push it backward. � To remove the shelf, just slide the side locks (if available) as in the picture, and pull it toward you. � After replacing the extra shelf, slide the side locks in its original position.
1
2
SLIDING GLASS SHELVES (depending on the model) Your refrigerator is provided with sliding glass shelves which make it easier for you to access foods stored at the shelves or at lower shelves. � The shelves are made of highly resistant hardened glass. � The edges of the shelves prevent split liquids from going to other compartments. � In some models the maximum load of glass shelf is given ( )
3
Changing the position of shelves:
Your refrigerator allows you to change the position of shelves according to your needs. � To remove the shelf, pull it forward to the stop. � Keep the lock pressed down ad shown in the picture detail, and pull the shelf frontward until it is released. The locks can be pressed separately. � Pull the pins outward to remove the rails. � Remove the rails as in the picture and place them where you wish. � To place the rails observe the inscrition � � written on the rail. � After that, place the shelf on them.
