SHARP ARFX3
Instrukcja Obsługi

Fax Setup

10
ABC

or

Press �1� if you want to specify the number as a Chain Dialing number (see �Chain Dialing for Long Numbers� in this section). Otherwise, press �2�.

11
STOP STOP

Step 4 or

Return to Step 4 to store another number, or press the STOP key a number of times until you exit. If the number is a Rapid key number, you can write the name on the label above the appropriate Rapid key.

Note: You may need to add a pause between certain digits in the number to allow ... time for connection. For example, if you are on a PBX telephone system that requires an access number, such as �9�, to be dialed to access an outside line, you will need to enter a pause between the access number and the fax number of the other party. Pauses are entered by pressing the REDIAL PAUSE key (2 seconds per pause). If necessary, several pauses can be entered in a row.
Use the following procedure to clear numbers:

Step

Press these keys
FUNCTION

Comments
�ENTRY MODE� will appear in the display. �FAX NUMBER MODE� will appear in the display.

1 2 3 4

DEF

ABC

Select CLEAR. �FAX NUMBER CLEAR� will appear in the display. To clear a Rapid key number, press the appropriate Rapid key. To clear a Speed Dial number, enter the 2-digit number with the number keys. �PRESS ENTER KEY� will appear in the display. If there is no number stored under that Rapid key or Speed Dial number, �NO NUMBER STORED� will appear in the display. �CLEARED� will appear in the display.
STOP

01

(example)

...

5
Step 4 or

ENTER

6

STOP

Return to Step 4 to clear another number, or press the STOP key a number of times until you exit.

2-20
02 INITAL. b(SUK) A5.p65 20

INITIAL SETTINGS

11/10/99, 13:51