Documentation made available quickly and It is good quality. Thanks.
Tekstowy podgląd strony 1 (kliknij aby zobaczyć)
SERVICE MANUAL
CODE: 00ZARLC2N/A1E
DIGITAL FULL COLOR COPIER OPTION LARGE CAPACITY PAPER FEED TRAY MODEL
This Service Manual describes only the differences from the AR-LC2. Please use this Service Manual together with the AR-LC2 Service Manual.
AR-LC2N
1. General
The AR-LC2N is a minor-change model of the AR-LC2, which allows the use with the AR-C160. This model can be also used with the AR-C150/C250 as well as the ARC160. This model differs from the AR-LC2 in the following points. The weight plate is attached to the paper pick-up roller of the paper feed unit to increase the paper pick-up roller pressure on paper. This improves the paper feed capacity to realize the high-speed paper feed in the monochrome print mode. The ROM is also changed for the AR-LC2N to realize the high-speed paper feed and transport in the ARC160 monochrome print mode. By adding the following parts to the AR-LC2, it serves same as the ARLC2N.
2. Remodeling the AR-LC2 into the AR-LC2N
1) Replace the ROM with one for the AR-LC2N.
For AR-LC2N
No 1 2 1 PARTS CODE LPLTM5953FCZZ XHBSE40P10000 0EUUNT27C016A DESCRIPTION Weight plate (Additional part) Screw (Weight plate fixing screw) (Additional part) ROM 2) Attach the weight plate to the paper feed unit as shown in the figure below.
For AR-LC2
No 1 PARTS CODE 0EUUNT27C002B DESCRIPTION ROM
Parts marked with � � are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.
SHARP CORPORATION
This document has been published to be used for after sales service only. The contents are subject to change without notice.
