Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 88 (kliknij aby zobaczyć)
FINISHER
Staple cartridge replacement
When the staple cartridge becomes empty, the message �Add staples.� will appear in the message display of the operation panel. Follow the procedure below to replace the staple cartridge.
1 Open the front cover.
NOTES q Do not remove the tape from the cartridge before inserting the staple cartridge into the box. q When reinstalling the staple box, push it in until it clicks into place.
6 Remove the tape from the staple cartridge
by pulling it straight.
2 Turn the staple unit to face up.
7 Reinstall the staple box. 3 Pull the release lever for the staple box and
remove the box.
Push the staple box in until it clicks into place.
8 While pushing the staple unit release lever 4 Remove the empty staple cartridge from the
staple box. to the left, rotate the staple unit to face down.
9 Close the front cover. 5 Insert a new staple cartridge into the staple
box aligning the arrow of the staple cartridge with that of the staple box.
NOTE Make a test print or copy in the staple sort mode to ensure that stapling is performed properly.