|
Dla tego produktu nie napisano jeszcze recenzji!
 ;
Wszystko w porządku.
Instrukcja czytelna i kompletna.
Dziękuję.
all right!
thank you.
;
Bardzo dobra instrukcja. Zawiera wszystko co potrzeba, polecam!
 ;
Instrukcja jest OK. Schematy czytelne, opisane niektóre procedury.
;
Instrukcja bardzo czytelna. zawiera co potrzeba. Polecam
;
...instrukcja serwisowa w pełni czytelna i kompletna. Dziękuję!
(7)
1)
Staple/Fold Drive Unit
Open the front door, and slide out the stapler unit slightly to the front.
10) Disconnect the two connectors [18], and free the harness [20] from the edge saddle [19].
[18]
1
2
[20] [18] [19]
11) Remove the three screws [21].
[21]
2) 3) 4) 5)
Remove the screw [3], and detach the interface retainer [4]. Free the six harness retainers [5], and disconnect the connector [6]. Free the harness [7] from the harness retainer [5]. Free the harness [7] from the edge saddle [8]; then, disconnect the two connectors [9].
[21]
[9]
[7]
[8]
[21]
[5] [6] [7] [3]
12) Remove the screw [22], and detach the staple/fold drive unit [23].
[7]
[5]
[4] [5] [7] [5]
6) 7) 8)
Release the harness retainer [10], and disconnect the connector [11]. Free the harness [12] from the harness retainer [10]. Free the harness [12] for the edge saddle [13]; and disconnect the two connectors [14].
[14] [11]
[22] [23]
(8)
1) 2) 3) 4)
Feed Motor Unit
Remove the rear cover. (See A.(3).) Open the harness retainer [1], and disconnect the two connectors [2]. Remove the screw [3], and detach the harness guide [4]. Remove the three screws [5], and detach the feed motor unit [6].
[5]
[12] [13] [10]
9)
Remove the screw [15], and free the claw [17] of the harness guide from the long angle [16] of the base plate.
[15]
[5] [3]
[4] [6]
[16]
[17]
[1]
[2]
MX-FNX2/AR-PN1/MX-RBX1 DISASSEMBLY AND ASSEMBLY 6 � 7
|
