Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 4 (kliknij aby zobaczyć)
Choosing a power supply This radio can be operated using. 4 Alkaline UM-3(LR6)(AA size)batteries. Household AC adapter(not supplied). Installing batteries 1.Position the radio face down 2.Press the catch marked " " and slide in the direction shown. 3.Insert the 4 UM-2 (LR6)(AA size) batteries. 4. Replace the battery cover. Battery replacement The battery indicator will display the battery condition for approx.7 seconds after the radio is switched off. If the battery strength indicator is shown below2.the batteries Should be replaced. After removing the batteries you have approx.3 minutes to replace the batteries after which clock and memory information will be lost. Low battery warnings 1.Replace batteries if display flashes " ".
2.Replace batteries if press power button, the radio still not operate. Using the AC adapter Insert the adapter plug into the socket 6V DC on the left side of the radio. Plug the adapter into a standard mains socket outlet. Whenever the adapter is used, the batteries are automatically disconnected.
The mains adapter should be disconnected from the mains supply when not in use for long time.
We would recommend that the receiver operates via the AC adapter whenever possible, add with battery operation for occasional or stand-by use only.
Setting the clock
The clock will start running when the batteries are installed or the adapter is plugged in. The display will show "0:00" or "AM 12:00" and real time icon.
