M-AUDIO AUDIOPHILE192
Skrócona Instrukcja Obsługi

Connecting the Audiophile 192
The Audiophile 192 offers following connections: < Main Inputs 1 and 2 � Connect the line outputs of analog devices like mic preamps or keyboards into these. < S/PDIF Input � Connect digital devices that have an S/PDIF output here. < Main Outputs 1 and 2 � These should be connected to the analog inputs of a 2-track recorder or can be used to connect to an alternate pair of powered speakers. < Monitor Outputs 1 and 2 � Connect these to your powered monitors. The output source of these outputs is the monitor mixer selection on the patchbay/routing page. < S/PDIF Output � Connect this to digital devices that have an S/PDIF input. < MIDI I/O � Connect these to your MIDI keyboards and sound modules.

Monitor Mixer Page
The Monitor Mixer page has fader controls for the input sources feeding the Audiophile 192�s software Monitor Mixer. The output of the Monitor Mixer appears at the analog Monitor Outputs. Note that the Main Outputs� overall output level is affected by the S/W RET 1/2 (WavOut 1/2) level faders.

WavOut 1/2*
These faders control the volume level of the main audio stream output, assigned from your DAW software in the monitor mixer, and the overall output of the Analog Hardware Outs 1 and 2. *NOTE: on the Mac this is labeled SW Out 1/2.
4