Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 9 (kliknij aby zobaczyć)
Remote control buttons and functions
DISPLAY button
You can continuously display the current channel number or VIDEO mode on the screen. Press this button. To turn the display off, press this button again.
� When selecting a VIDEO mode with no signal, indication of the VIDEO mode becomes fixed on the screen.
RETURN + button
You can set a channel you frequently view to the Return Channel and you can view that channel at any time with one-touch. To set the channel to the Return Channel: 1 Select the channel you want to set to the Return Channel. 2 Press this button and hold until the message �RETURN PLUS PROGRAMMED!� appears.
� When you turn off the TV, the Return Channel setting is cancelled.
OFF TIMER button
You can set the TV to automatically turn off after a set time. Press this button to select the period of time.
� You can set the period of time to a maximum of 120 minutes in 10 minute increments. � 1 minute before the OFF TIMER function turns off the TV, �GOOD NIGHT!� appears.
To view the Return Channel: Press this button.
� You can view two channels (current channel and Return Channel) alternately by pressing this button.
To cancel the Return Channel setting: Press this button and hold until the message�RETURN PLUS CANCELLED!� appears. If no channel is set to the Return Channel: You can view the channel selected right before the current channel by pressing this button.
To display the remaining time, press this button once. To cancel the OFF TIMER function, press this button to set the period of time to 0.
� The OFF TIMER function will not turn off the TV�s main power.
CHANNEL SCAN button
You can quickly view all TV channels programs that you can view on your TV, and search for the program you want to view. 1 Press this button to start scanning TV channels. The TV channel programs are each displayed for several seconds.
� The programs of TV channels for which the CHANNEL SKIP function is set to skip on are not displayed.
2 When you find the program you want to view, press this button again to stop scanning.
