Documentation made available quickly and It is good quality. Thanks.
Tekstowy podgląd strony 11 (kliknij aby zobaczyć)
AV-32R370KE AV-32T67SKE AV-32T35SPE 2.4.11 REMOVING THE CRT NOTE: � Replacement of the CRT should be performed by 2 or more persons. � After removing the REAR COVER, CHASSIS etc., (1) Putting the CRT change table on soft cloth, the CRT change table should also be covered with such soft cloth (shown in Fig. 6). (2) While keeping the surface of CRT down, mount the TV set on the CRT change table balanced will as shown in Fig. 7. (3) Remove 4 screws marked by arrows with a box type screwdriver as shown in Fig. 7. NOTE: Since the cabinet will drop when screws have been removed, be sure to support the cabinet with hands. (4) After 4 screws have been removed, put the cabinet slowly on cloth (At this time, be carefully so as not to damage the front surface of the cabinet) shown in Fig. 8. NOTE: � The CRT should be assembled according to the opposite sequence of its dismounting steps. � The CRT change table should preferably be smaller that the CRT surface, and its height be about 35cm. Fig.7
CRT CHANGE TABLE
APPROX. 35cm CLOTH
Fig.6
CRT
CRT CHANGE TABLE BOX TYPE SCREW DRIVER
CRT
CABINET
CRT CHANGE TABLE
Fig.8
CAUTION The woofer unit is mounted on the TV. Always move the TV and woofer unit together when removing the TV from the box, or when moving the woofer unit. If the TV is tilted during movement, the woofer unit may fall. Be careful to keep the TV level when moving it. Do not grip the woofer unit only when moving the TV. Do not place objects on the woofer unit duct.
