DVD and Video CD Operation Playing a DVD and Video CD
Playback Setup
DVD VCD2.0 VCD1.1
Tip
To play from the beginning of the disc, press x twice, then press H (PLAY). Notes Depending on where you stopped the disc, the receiver may not resume playback from exactly the same point. The point where you stopped playing is cleared when: - Press x in the STOP mode. - Turn the power off . - Open the disc tray.
Turn on the TV and select the video input source connected to the DVD Receiver. Set the Output Source to CD/DVD as shown in Selecting the Output/Input Source on page 16.
1 Press Z to open the disc tray. 2 Place a double-sidedtray, with the label facing up. a disc on the When DVD is inserted, make sure the 3
side you want to play is facing down. Press Z to close the tray. �READING� appears in the display window, and playback starts automatically. If playback does not start, press H (PLAY). In some cases, the disc menu might appear instead.
Selecting Another TITLE
DVD
1 /3
If a menu screen is displayed
A menu screen may appear automatically after loading a DVD.
DVD
If a disc has more than one title, you can select another title as follows: Press DVD DISPLAY. Use V/v to select title icon, then press the appropriate number buttons (0-9), then use ENTER to select a title number. Press DVD DISPLAY, then use B/b to select a title number, then press ENTER.
Selecting Another CHAPTER/TRACK
DVD VCD2.0 VCD1.1
1 /12 1 /3
Use B/b/V/v buttons to select the title/chapter you want to view, then press ENTER to start playback. Press DVD TOP MENU or DVD MENU to return to the menu screen.
VCD2.0
Use the number buttons to select the track you want to view. Press RETURN to return to the menu screen. Menu setting and the exact operating procedures for using the menu may differ depending on the disc. Follow the instructions on the each menu screen. You also may set PBC to Off under setup. See page 20. Notes If Parental Control is set and the disc is not within the Rating settings (not authorized), the 4-digit password must be entered and/or the disc must be authorized (see Parental Control, on page 21). DVDs may have a Region Code. Your DVD Receiver will not play discs that have a Region Code different from your DVD Receiver. The Region Code for this DVD Receiver is 4 (four). Do not keep a fixed image displayed on the screen for a long time.
If a title on a disc has more than one chapter or a disc has more than one track, you can move to another chapter/track as follows: Press PREV or NEXT briefly during playback to return to the beginning of the current chapter/track or to select the next chapter/track. Press PREV twice briefly to step back to the previous chapter/track. To go directly to any chapter during playback, press DVD DISPLAY. Use V/v to select chapter/track icon. Then, enter the chapter/track number with the number buttons (0-9) or use B/b to select chapter. Then, press ENTER. Notes For one-digit numbers, press the number buttons (1-9) and wait that the operation is performed. For two-digit numbers, press the number buttons (0-9) in rapid succession. On a Video CD with PBC, you must set PBC to Off on the setup menu to use this function. See page 20.
Search
DVD
VCD2.0
VCD1.1
General Features
Note Unless stated otherwise, all operations described use the remote control. Some features may also be available on the Setup menu.
1 Press m or M during playback.
The DVD Receiver will now go into SEARCH mode.
Resume Function
DVD
VCD2.0 VCD1.1
CD
2 Press m or M repeatedly to select the required speed: X2 b, 1 m, 2 m, 3 m (backward) or X2 B, 1 M, 2 M, 3 M (forward). With a Video CD, the Search speed changes: 1 m, 2 m, 3 m (backward) or 1 M, 2 M, 3 M (forward). 3 To return to playback, press H (PLAY).
When you stop the disc, the DVD remembers the point where you pressed x (STOP) and �RESUME x� appears on the TV screen. Press H (PLAY) and play will resume from this point.
Still Picture
DVD
VCD2.0
VCD1.1
1 Press X (PAUSE) during playback. The DVD Receiver will go into PAUSE mode. 2 To return to playback, press or X (PAUSE) again or H (PLAY).
22
