...instrukcja serwisowa w pełni czytelna i kompletna. Dziękuję!
Tekstowy podgląd strony 84 (kliknij aby zobaczyć)
1
2
3
4
- Removing the Case (Fig.4)
A
1 2 3
Remove the two screws and then remove the Holder. Remove the screw.
3 1 3 2 1 3
3
3
Remove the five screws and then remove the Case.
Case
B
Holder
Fig.4
- Removing the Display Assy (Fig.5)
Motor Unit
Switch
1
Remove the screw.
Disconnect the connector and then remove the Motor Unit.
2
C
Remove the two screws and then remove the two Holders. Pull out the Display Assy in the arrow indicated direction.
1
3
Note) When reassembling, hold the switch down with tweezers or the like and put the Display Assy back to the Chassis. Otherwise, the switch may be damaged and not function properly.
2
2
D
Holder
3
Display Assy Holder
Fig.5
- Removing the Main Unit (Fig.6)
Bracket
2 3 1 3
Shaft Unit
2
1 2 3
Remove the screw and then remove the Bracket. Remove the four screws and then remove the Shaft Unit. Remove the three screws.
2
2
E
3
Disconnect the connector and then remove the Main Unit.
