PROGRAMME START
1. Plug in the appliance. 2. Turn on the water supply tap. 3. Press the �ON/OFF� button.
6 7
DOOR LOCK
The door locks automatically after the programme start until the end of the programme.
PROGRAMME END SELECTING THE PROGRAMME
Turn the programme selector knob clockwise to the programme with the desired temperature. � The programme sequence indicator is at �Stop�. 1. Press the �ON/OFF� button. 2. Cancel the special options by pressing the appropriate buttons. 3. Turn the water supply tap(s) off. 4. Wait for the door to unlock (about 2 minutes). 5. Open the door and unload the machine. Note: Do not fully close the door but leave it ajar to allow the drum to dry out.
PRESS THE DESIRED SPECIAL OPTION BUTTON
Lightly soiled/Half load button � Reduces water consumption, above all during the rinse. � Especially suitable for lightly soiled or small loads (reduce the detergent quantity). No spin button � Press this button to exclude the spin function from the programme. Cold wash button � The water is used at the water supply temperature.
PROGRAMME RESELECTION
1. Press the �ON/OFF� button. 2. Select the new programme, temperature and relative options. 3. Press the �ON/OFF� button.